Pass4Test vous offre un choix meilleur pour faire votre préparation de test Riverbed 299-01 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Riverbed 299-01 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Riverbed 299-01 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Riverbed 299-01 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Riverbed 299-01, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Riverbed 299-01. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Riverbed 299-01. Choisir le produit de Pass4Test particulier pour le test Certification Riverbed 299-01 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
Code d'Examen: 299-01
Nom d'Examen: Riverbed (Riverbed Certified Solutions Professional - Network Performance Management)
Questions et réponses: 245 Q&As
Beaucoup de gens trouvent difficile à passer le test Riverbed 299-01, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Riverbed 299-01 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
299-01 Démo gratuit à télécharger: http://www.pass4test.fr/299-01.html
NO.1 For DNS reverse lookup, Cascade Profiler caches as follows:
A. Cache the most recent 500 IPs.
B. Obey DNS TTLs.
C. Cascade does not cache DNS responses.
D. For 24 hours.
Answer: C
Riverbed 299-01 certification 299-01
NO.2 What is a good way to know whether all internal IP addresses seen by the Cascade Profiler
have been grouped in a particular group type?
A. Run Automatic grouping for all group types.
B. Configure an Undefined group type with definition 0.0.0.0/0; confirm there are no entries when
you
'view members' of this 'Undefined' group'.
C. There is no way to do this and successfully capture all the IP addresses.
D. Configure an Undefined group type with definition 0.0.0.0/32.
E. Run a report by hosts and look for undefined groups.
Answer: B
Riverbed examen 299-01 299-01 299-01 299-01
NO.3 What is the relationship between a Host Group and a Host Group Type in Cascade Profiler?
A. A Host Group Type is a container that may contain multiple Host Groups.
B. A Host Group Type defines the name of the Host Group.
C. They are the same thing.
D. Each Host Group must be defined by the Type of application it serves; this is the Host Group
Type.
Answer: A
certification Riverbed certification 299-01 299-01 299-01 examen
NO.4 Within the Cascade Pilot GUI, filtered items are often indicated:
A. With red text.
B. With yellow text.
C. With a funnel icon.
D. With a hash-mark icon.
Answer: C
Riverbed 299-01 299-01
NO.5 Within Cascade Pilot, to analyze the round-trip time in a trace file, you can:
A. Ask Riverbed Support to send you the proper View to use.
B. Open the View folders in Cascade Pilot to look for a View named "Round-trip time".
C. Use the View search box and enter "round".
D. Use the Help menu and search for round.
Answer: C
Riverbed 299-01 299-01 examen
NO.6 If a VLAN SPAN (VLAN101) is configured and monitored by Cascade Shark, which of the
following is true? (Select 2)
A. Inter VLAN101 traffic will be monitored; Intra VLAN101 traffic will not.
B. Intra VLAN101 traffic will be monitored; Inter VLAN101 traffic will not.
C. Both inter and intra VLAN101 traffic will be monitored.
D. It is a best practice to configure the Cascade Shark monitoring port (the SPAN destination) with
'deduplication' enabled.
E. It is a best practice to configure the Cascade Shark monitoring port (the SPAN destination)
without
'deduplication' enabled.
Answer: C,D
certification Riverbed 299-01 299-01 certification 299-01 299-01
NO.7 Link Congestion policies apply to a specific interface and can: (Select 3)
A. Warn if either inbound or outbound traffic increases abnormally
B. Warn if an application component of traffic increases abnormally
C. Warn if traffic to/from specific hosts exceeds a specific utilization level
D. Warn if the response time across a link increases abnormally
Answer: A,B,C
certification Riverbed 299-01 299-01
NO.8 Cascade Profiler's Switch Integration feature uses SNMP and adds the capability for Cascade
to report on which of the following. (Select 2)
A. User name
B. Host IP address
C. Host MAC address
D. The physical switch port a specific host is connected to
E. Switch port traffic levels
F. Switch port status
G. SNMP traps from the switch
Answer: C,D
Riverbed certification 299-01 certification 299-01 299-01 certification 299-01
NO.9 Cascade Profiler provides identity information collected from Active Directory 2008 by
installing and
correctly configuring the 'Cascade Connector' agent software on:
A. Every DNS server in the AD environment
B. Any server in the MS domain
C. Every client desktop in the AD environment
D. Every NTP server in the MS domain
E. The Microsoft Event Collector component in the AD environment
Answer: E
Riverbed examen 299-01 299-01 examen 299-01 299-01
NO.10 When changing the priority for a Layer 4 mapping on Cascade Profiler best practices indicate
that
Application Mappings should be given higher priorities based on:
A. Longest Match
B. Shortest Match
C. IP & Port
D. IP
Answer: A
Riverbed certification 299-01 certification 299-01 certification 299-01
NO.11 When editing a previously configured service policy, what options become available if you
click the
'show advanced settings' checkbox? (Select 3)
A. Allows enabling/disabling the detection of dips in the metric.
B. Allows tuning of the tolerance range of the metric.
C. Allows setting of a noise floor for the metric.
D. Allows adjusting the notifications for the metric.
E. Allows enabling/disabling the detection of spikes in the metric.
Answer: A,C,E
certification Riverbed 299-01 299-01 299-01
NO.12 If a report table on Cascade Profiler includes the "Server Delay" column but shows no value
for
"Server Delay" in some cells, what are the possible causes? (Select 3)
A. The time span of the report does not cover any connection set-up points
B. Server delay is zero.
C. The protocol used by the application in not TCP-based.
D. Application traffic was not seen by a Cascade Sensor.
E. The server plug-in is needed to measure "Server Delay" and not functioning correctly.
Answer: A,C,D
Riverbed certification 299-01 certification 299-01 299-01
NO.13 If unable to connect to the Cascade Shark Appliance from the Cascade Pilot console it could
be
because. (Select 2)
A. The correct communication port(s) are NOT open on the firewall between Cascade Pilot and
Cascade
Shark.
B. The Cascade Shark is placed in "passthru" mode so Cascade Pilot access is not available
C. The Cascade Shark appliance has no capture jobs configured.
D. You may be running Cascade Pilot-Personal-Edition (PE). You need the full version of Cascade
Pilot to
connect to Cascade Shark.
E. Trend/Index data is disabled on the Cascade Shark Appliance.
Answer: A,D
Riverbed examen 299-01 examen certification 299-01 299-01 examen 299-01
NO.14 What are the two types of dashboards available within the Cascade Profiler GUI? (select 2)
A. Top Hosts
B. Top Applications
C. Public
D. Private
E. Devices and Interfaces Utilization
Answer: C,D
Riverbed 299-01 examen 299-01
NO.15 Quality of Service information is obtained from what Cascade sources?
A. Cascade Sensor only
B. Cannot get QoS data on Cascade
C. Cascade Sensor and Cascade Gateway
D. CascadeFlow traffic only
E. NetFlow and IPFIX traffic only
Answer: C
certification Riverbed 299-01 299-01 299-01 examen
NO.16 Which of the following configuration changes can be used to reduce the number of alerts
generated overall for a Service?
A. Edit each Service policy to increase the Tolerance slider for Low and High alerts.
B. Edit each Service policy and set a noise floor to specify the minimum amount of change that the
policy
can treat as deviation from normalbehavior.
C. Edit the Service and select fewer metrics to monitor for each segment that comprises the Service.
D. Modify the location host group type used for monitoring end user traffic to use fewer groups (for
example, Region instead of Site).
E. A, B, C, and D.
F. A and B only.
Answer: E
Riverbed 299-01 299-01 examen 299-01
NO.17 How do Cascade Performance Analytics assist with Performance Monitoring?
A. By setting intelligent static thresholds for Application metrics and Interface metrics, tolerance can
be
determined. Cascade will use these thresholds and tolerances to report on deviations indicative of
performance problems.
B. The Customer only needs to identify their critical hosts, interfaces and/or applications, and
Cascade
will automatically baseline their behavior and report on deviations indicative of performance
problems.
C. The Performance Analytics use knowledge of hosts, interfaces, and/or applications are able to
detect
security threats such as host scans and worms.
D. After baselining is completed, Cascade can re-route congested traffic to avoid congested
application
delivery paths.
Answer: B
Riverbed 299-01 299-01 examen 299-01
NO.18 What are two differences between NetFlow version 5 and NetFlow version 9 (select 2)
A. NetFlow version 5 generally support ingress flow export only; NetFlow version 9 supports both
ingress
and egress export.
B. NetFlow version 5 is used for Switches, NetFlow version 9 is used for Routers.
C. NetFlow version 9 includes information about CPU, Power-status and other router performance
characteristics; NetFlow version 5 does not.
D. NetFlow version 9 includes the ability to export the Time-To-Live (TTL); NetFlow version 5 does
not.
E. NetFlow version 9 includes the ability to export the packet latency, NetFlow version 5 does not.
Answer: A,D
Riverbed examen 299-01 299-01 certification 299-01
NO.19 Which of the following statements is true regarding SNMP polling and NTP syncing among
Cascade components?
A. Cascade Gateway's poll via SNMP sources of Netflow, while Cascade Profiler, Cascade Gateway
and
Cascade Sensor sync NTP from a common source.
B. Cascade Profiler's poll via SNMP sources of Netflow, while Cascade Profiler, Cascade Gateway and
Cascade Sensor sync NTP from a common source.
C. Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from different sources, while
Cascade Profiler's poll via SNMP sources of Netflow.
D. Cascade Profiler, Cascade Gateway and Cascade Sensor sync NTP from different sources, while
Cascade Gateway's poll via SNMP sources of Netflow.
E. Cascade Profiler does all SNMP polling and is also the source of all NTP.
Answer: D
Riverbed 299-01 examen certification 299-01 certification 299-01
NO.20 When creating an analytic service, the discovery process requires a minimum of:
A. At least three days of data available.
B. At least three weeks of data available.
C. The application specialist available.
D. Some historical data and some starting point (a server, port, application).
E. A customer network diagram available.
Answer: D
Riverbed examen certification 299-01 299-01 examen 299-01 examen
Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification Riverbed 299-01, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test Riverbed 299-01.
没有评论:
发表评论