Pass4Test offre une formation sur Microsoft 070-660 matériaux examen

Vous n'avez besoin que de faire les exercices à propos du test Microsoft 070-660 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Microsoft 070-660 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Microsoft 070-660 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Microsoft 070-660.

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 070-660 est lequel très important dans les tests de Certification Microsoft. Pour être qualifié de Microsoft, on doit obtenir le passport de test Microsoft 070-660.

Code d'Examen: 070-660
Nom d'Examen: Microsoft (TS:Windows Internals)
Questions et réponses: 68 Q&As

Beaucoup de gens trouvent difficile à passer le test Microsoft 070-660, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft 070-660 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

070-660 Démo gratuit à télécharger: http://www.pass4test.fr/070-660.html

NO.1 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of a multithreaded application. Now is being tested by you. You have
to use Perfmon to test the application for heap leaks. Of the following counters, which one should be
monitored?
A.Process\Private Bytes
B.Memory\Available Bytes
C.Memory\Committed Bytes
D.Process\Pool Paged Bytes
Answer:A

Microsoft examen   070-660   070-660 examen   070-660   certification 070-660

NO.2 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of an application. This application runs at a customer's site. Because
of heap corruption, the application crashes intermittently. In order to enable yourself to check and resolve
the heap corruption, you ask the customer to have full page heap enabled on the application process. You
receive a user dump file from the customer. What you should do is to make it clear at the time that the
user dump was created, whether the full page heap was enabled. Of the following WinDbg commands,
which one should be used?
A.!vm should be used.
B.!gflag should be used.
C.!heap should be used.
D.!verifier should be used.
Answer:B

certification Microsoft   070-660   certification 070-660   070-660

NO.3 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a computer named c01. Windows Server 2008 is run by C01. Now you are
using WinDbg to debug C01. You find that one thread is waiting for a critical section. This section is
owned by another thread. You have to locate the critical section. Of the following WinDbg commands,
which one should be used?
A.You should choose to use.thread
B.You should choose to use !deadlock
C.You should choose to use!kdext.locks
D.You should choose to use!ntsdexts.locks
Answer:D

certification Microsoft   070-660   certification 070-660   070-660   certification 070-660

NO.4 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a colleague named Jason in the company. He has a computer named C01. C01
runs Windows Vista. He finds that a service process is using 100 percent of the processor. He has to
force a process dump of the service, meanwhile the service is consuming 100 percent of the processor.
He has no idea about which tool he should use. Since you are the technical support, he asks for your
answer. So which of the following tools should be used?
A.He should choose to use Umdh.exe
B.He should choose to use Tlist.exe
C.He should choose to use Pview.exe
D.He should choose to use Adplus.vbs
Answer:D

Microsoft examen   070-660   070-660 examen   070-660   certification 070-660   070-660

NO.5 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You have a device driver that has one monitoring thread named ThreadA. The device
driver has three worker threads. They are respectively named ThreadB, ThreadC, and ThreadD. The
worker threads run every 10 seconds and complete within 1 second. If any worker thread does not run at
least once every 30 seconds, ThreadA calls KeBugCheckEx, and then a complete kernel crash dump is
generated. A bug check and a complete kernel dump are generated by the computer. You find the
following after you review the complete kernel dump: You have to find out the root cause of the bug check.
So what caused the bug check to occur?
A.It was caused by the state of ThreadA
B.It was caused by the priority of ThreadA.
C.It was caused by the priority of ThreadD
D.It was caused by the state of ThreadA and ThreadB
E.It was caused by the state of ThreadB and ThreadC
Answer:C

Microsoft examen   070-660   certification 070-660   070-660 examen

NO.6 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, an I/O dispatch routine is being written by you
for a Windows device driver. buffered I/O is supported by the device driver. 1 KB of data to the user
process is transferred by the dispatch routine. The kernel address of the 1-KB buffer needs to be retrieved
from the I/O request packet (IRP). Which field of the IRP contains the kernel address?
A.Irp->UserBuffer
B.Irp->Overlay.UserApcContext
C.Irp->Tail.Overlay.DriverContext[0]
D.Irp->AssociatedIrp.SystemBuffer
Answer:D

Microsoft   070-660   070-660   070-660 examen

NO.7 You are the IT professional who work in an International company named Wiikigo. You are
experienced in troubleshooting operating systems and applications that are not working correctly,
identifying code defects and so on. You have enough knowledge on windows internals and you provide
technical support for the company. You are in charge of an application service. Because of heap
corruption, it crashes intermittently. When it occurs, you have to detect the heap corruption. Of the
following tolls, which one should be used?
A.You should choose to use Page Heap
B.You should choose to use Special Pool
C.You should choose to use driver Verifier
D.You should choose to use Memory Pool Monitor
Answer:A

Microsoft   070-660   070-660   070-660 examen

NO.8 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, you are debugging a Windows device driver. An
unexpectedly long delay occurs on the device driver. You locate the problem in the following
synchronization mechanism. kd> dt var_sema Local var @ 0xf9dfbc48 Type _KSEMAPHORE +0x000
Header : _DISPATCHER_HEADER +0x010 Limit : 2 kd> dt nt!_DISPATCHER_HEADER f9dfbc48
+0x000 Type : 0x5 '' +0x001 Absolute : 0xe6 '' +0x002 Size : 0x5 '' +0x003 Inserted : 0xbb '' +0x004
SignalState : 0 +0x008 WaitListHead : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] kd> dt
nt!_KWAIT_BLOCK 0x819ca438 +0x000 WaitListEntry : _LIST_ENTRY [ 0xf9dfbc50 - 0xf9dfbc50 ]
+0x008 Thread : 0x819ca3c8 _KTHREAD +0x00c Object : 0xf9dfbc48 +0x010 NextWaitBlock :
0.819ca480 _KWAIT_BLOCK +0x014 WaitKey : 0 +0x016 WaitType : 1 kd> dt nt!_KWAIT_BLOCK
0xf9dfbc50 +0x000 WaitListEntry : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] +0x008 Thread :
0.00000002 _KTHREAD +0x00c Object : 0xfd050f80 +0x010 NextWaitBlock : 0xffffffff _KWAIT_BLOCK
+0x014 WaitKey : 0 +0x016 WaitType : 0 You have to find out the number of threads that the semaphore
currently has waiting. How many threads does the semaphore currently have waiting?
A.0
B.1
C.2
D.4
E.5
Answer:B

Microsoft   070-660 examen   070-660

NO.9 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are writing a user application that runs on Windows Server 2003. According to the
company requirement, a user application is being written by you. This application runs on Windows
Server 2003. User authentication is need by the design specification for the application. You must make
sure that each time the application is started, a local user name and password is entered by users. So
which routine should be used?
A.CredUIParseUserName()should be used.
B.LsaRegisterLogonProcess()should be used.
C.CredReadDomainCredentials() should be used.
D.CredUIPromptForCredentials()should be used.
Answer:D

Microsoft examen   070-660   070-660

NO.10 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. For a hardware device, you are developing a Windows device driver. You will install the
device driver and hardware device on computers that run Windows Server 2008. Now you have to find out
the amount of time that the processor uses to receive and process interrupts. Which of the following tools
should be used?
A.You should choose to use Pview.exe
B.You should choose to use Taskmgr.exe
C.You should choose to use Eventvwr.msc
D.You should choose to use Perfmon.msc
Answer:D

certification Microsoft   070-660 examen   certification 070-660

Les produits de Pass4Test sont préparés pour le test Certification Microsoft 070-660, y compris les formations et les informations ciblées au test Microsoft 070-660. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.