Le test Oracle 1Z0-141 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Oracle 1Z0-141 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Oracle 1Z0-141 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Oracle 1Z0-141 avec l'aide de Pass4Test.
Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Oracle 1Z0-141 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Oracle 1Z0-141 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Oracle 1Z0-141.
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Oracle 1Z0-141 très tôt. Pass4Test peut vous permettre à réussir 100% le test Oracle 1Z0-141, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Oracle 1Z0-141, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Oracle 1Z0-141. Le guide d'étude de Pass4Test comprend les excercices de Oracle 1Z0-141 et la Q&A qui peut vous permetrre à réussir 100% le test Oracle 1Z0-141. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
Participer au test Oracle 1Z0-141 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Oracle 1Z0-141 symbole bien la professionnalité d'un travailleur dans cette industrie.
Code d'Examen: 1Z0-141
Nom d'Examen: Oracle (Oracle9i forma Developer:build internet applications)
Questions et réponses: 138 Q&As
Le test Oracle 1Z0-141 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test Oracle 1Z0-141. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test Oracle 1Z0-141. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
1Z0-141 Démo gratuit à télécharger: http://www.pass4test.fr/1Z0-141.html
NO.1 You created a query Record Group at design time. Which built-in can you use to execute the
query defined in the Record Group object?
A.ADD_GROUP_ROW
B.POPULATE _GROUP
C.ADD_GROUP_COLUMN
D.SET_GROUP_SELECTION
E.CREATE_GROUP_FROM_QUERY
F.POPULATE _GROUP_WITH_QUERY
Correct:B
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.2 Which two statements about a Non-Query Record Group are true? (Choose two.)
A.The Record Group is associated with a query at run time or at design time.
B.The Record Group can be created and modified only at run time.
C.The Record Group can be created and modified only at design time.
D.The Record Group can be created and modified at design time or at run time.
E.You can modify the structure of this Record Group by adding columns and rows.
F.The Record Group is associated with a query only at design time.
Correct:B E
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.3 View the Exhibit. You are running a form in debug mode, but you have not set any breakpoints
in the code. You click a button that invokes the code shown in the exhibit. While the code
executes, you decide to examine the variable values in the loop. Which menu items in the Forms
Builder Debug menu would you choose?
A.Stop, Debug Windows > Variables
B.Pause, Debug Windows > Variables
C.Stop, Debug Windows > Form Values
D.Pause, Debug Windows > Form Values
E.Step Into, Debug Windows > Variables
F.Step Into, Debug Windows > Form Values
Correct:B
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.4 Consider the following scenario: In a multiform application, the user started in FormA. 1. From
FormA, the user invoked FormB using CALL_FORM. 2. From FormB, the user invoked FormC
using OPEN_FORM. 3. From FormC, the user invoked FormD using OPEN_FORM. 4. From FormB,
the user invoked FormE using CALL_FORM. There is an additional form in the application, called
FormF. Which statement is true?
A.FormF can be invoked from FormC using CALL_FORM.
B.FormF can be invoked from FormA using OPEN_FORM.
C.FormF can be invoked from FormD using CALL_FORM.
D.FormF can be invoked from FormE using CALL_FORM.
E.FormF can be invoked from FormB using OPEN_FORM.
Correct:D
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.5 You are developing a Human Resources form for HR clerks to insert, update, and delete
records from the EMPLOYEES table. When the user commits records, Forms displays the default
informative message "FRM-40400: Transaction complete: records applied and saved." You want
to replace that with the message "Records inserted: Records updated: Records deleted: ", where
represents the number of records inserted, updated, and deleted. Which triggers must you create
or modify to accomplish this?
A.On-Message only
B.Post-Commit and On-Message
C.Post-Database-Commit and On-Message
D.When-Validate-Record and On-Message
E.Post-Insert, Post-Update, Post-Delete, and On-Message
Correct:E
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.6 View the Exhibit. The EMPLOYEES table contains 100 records. You are developing a Human
Resources form that has an Employees block with properties as shown in the exhibit. When you
run the form and execute a query in the Employees block, approximately how many network
round trips will be made to the server before records are displayed in the block?
A.1
B.2
C.10
D.50
E.100
Correct:C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.7 LibraryA and LibraryB are in the working directory of the Employees form. Library A is attached
to the Employees form. There is a stored procedure in the database called Raise_Salary which
must be called without any parameters. There is no Raise_Salary procedure in the form or in the
attached library. A When-Button-Pressed trigger in the Employees form contains this code:
raise_salary; Where does Forms search for the Raise_Salary procedure?
A.first in the attached library, then in the database
B.first in the form module, then in the attached library
C.first in the form module, then in the attached library, then in the database
D.first in the form module, then in the attached library, then in other libraries in the working directory, then
in the database
E.in the form module only
F.in the attached library only
G.in the database only
Correct:C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.8 You need to resize the INVENTORY tab canvas. The Viewport Width and Height properties are
200 and 300. You change the values to 150 and 120, respectively. What implication may this have
on your design?
A.Some tab pages may be obscured at run time.
B.By decreasing the Viewport Width property, some tab pages may be deleted.
C.Objects previously within the borders of a tab page may fall outside the tab page border, and you will
get compilation errors.
D.Objects previously within the borders of a tab page may fall outside the tab page border and will be
visible at run time only by navigating to them programmatically.
E.Objects previously within the borders of a tab page may fall outside the tab page border and will be
assigned to the null canvas.
Correct:C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.9 The Warehouse.fmb module contains two data blocks. You want to display items from each
data block on separate content canvases. You must ensure that both content canvases are visible
together at run time. Which two statements about content canvases are correct? (Choose two.)
A.A window cannot display more than one content canvas during a run time session.
B.A content canvas can be associated with a window by setting the Window property of the canvas.
C.Two or more content canvases can be displayed by associating each of them with a different window.
D.A content canvas can be associated with a window by setting the Primary Canvas property of the
window.
E.A content canvas can be associated with two or more windows by setting the Primary Canvas property
of the windows.
F.Two or more content canvases can be displayed by setting their viewports to be smaller than the
window with which they are to be associated.
Correct:B C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.10 What type of message indicates a Forms message that cannot be suppressed?
A.a Busy message
B.a level 0 message
C.a Working message
D.a level 25 message
E.a level 50 message
F.a message with a level less than 0
G.a message with a level greater than 25
H.a message with a level greater than 50
Correct:G
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.11 View the Exhibit. You are modifying the New_Orders form. You want to change the navigation
order of the Orders block so that Order_Status is between Order_Date and Order_Mode in the
navigation order. You attempt to drag the Order_Status item in the Object Navigator (as shown in
the exhibit), but Forms does not allow you to release the item in the desired position. Why is this
happening, and what can you do to change the navigation order?
A.Because the data block is subclassed, you cannot change the order of items in the object navigator, but
you can change item properties to affect the navigation order.
B.Because the data block is subclassed, you can only drag objects to a lower position in the Object
Navigator, so you can drag Order_Mode and Customer_Id to a position below Order_Status.
C.Because the data block is subclassed, you will have to delete the object and then create it again in the
desired position.
D.Because the item is subclassed, you cannot change any of its properties.
Correct:A
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.12 In a multiform application, one form must invoke another. The form modules are called
Customers and Orders internally, but the compiled files are saved as CUST.FMX and ORD.FMX,
respectively. There is a button in the Customers form with a When-Button-Pressed trigger to
invoke the Orders form. There is a requirement that only one Orders form can be running at a time,
so the trigger must check to see if the form is already open. If it is open, the focus must be sent to
it. If it is not open, it has to be opened. Which of these trigger codes will achieve the required
functionality?
A.IF NOT FIND_FORM('ord') THEN OPEN_FORM('ord'); ELSE GO_FORM('orders'); END IF;
B.IF ID_NULL(FIND_FORM('ord')) THEN OPEN_FORM('orders'); ELSE GO_FORM('ord'); END IF;
C.IF ID_NULL(FIND_FORM('orders')) THEN OPEN_FORM('ord'); ELSE GO_FORM('orders'); END IF;
D.IF NOT FIND_FORM('orders')) THEN OPEN_FORM('orders'); ELSE GO_FORM('ord'); END IF;
Correct:C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.13 To centralize some of your processing, you decide to write PL/SQL library modules that contain
procedures that can be called from form triggers or menu items. You need to populate some fields
based on values in other fields. Which code do you use?
A.IF FIND_ITEM('ORDERS.order_total') > 10000 THEN FIND_ITEM('ORDERS.large_order') := 'Y';
MESSAGE('WARNING - large order!'); END IF;
B.IF :ORDERS.order_total > 10000 THEN :ORDERS.large_order := 'Y'; MESSAGE('WARNING - large
order!'); END IF;
C.IF 'ORDERS.order_total' > 10000 THEN 'ORDERS.large_order' := 'Y'; MESSAGE('WARNING - large
order!'); END IF;
D.IF :ORDERS.order_total > 10000 THEN COPY('ORDERS.large_order','Y'); MESSAGE('WARNING -
large order!'); END IF;
E.IF NAME_IN('ORDERS.order_total') > 10000 THEN COPY('Y','ORDERS.large_order');
MESSAGE('WARNING - large order!'); END IF;
Correct:E
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.14 You want to create a calculated item in the Control block of the Human Resources form. This
item will contain the total of employee salaries for employees in a particular department. Which
statement is true about how to create the calculated item?
A.You can create it by first creating a text item and then changing the item type.
B.You can create it in the Layout Editor using a special tool that creates a calculated item.
C.You can create it by first creating a display item and then setting appropriate properties in its Calculation
property group.
D.You can create it in the Layout Editor by selecting the Salary item of the Employees block, selecting the
Control block from the block list, clicking the Text Item tool, and drawing a text item on the canvas to
automatically calculate a sum of the selected Salary item.
Correct:C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.15 You have the Orders form open in Forms Builder. You create an object group in the Orders form
and you try to drag various components in the Object Navigator to the object group. Which two
components will you be unable to place in the object group? (Choose two.)
A.the Orders block of the Orders form
B.the Order_CV canvas of the Orders form
C.the When-New-Item-Instance trigger of the Order_Items.Quantity item in the Orders from
D.the When-New-Form-Instance trigger of the Orders form
E.the Product_Id item in the Order_Items block of the Orders form
Correct:C E
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.16 The two-column LOCATION Record Group has 10 rows. At run time, the user wants to mark two
or more LOCATION records for use by another Forms Builder object. The rows will be used to
construct a WHERE clause for a subsequent data block query. Which built-in enable individual
rows to be marked?
A.ADD_GROUP_COLUMN
B.SET_RECORD_PROPERTY
C.GET_GROUP_SELECTION
D.SET_GROUP_SELECTION
E.RESET_GROUP_SELECTION
F.GET_GROUP_RECORD_NUMBER
Correct:D
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.17 View the Exhibit. You are coding a When-New-Form-Instance trigger to populate a hierarchical
tree item called Emp_Tree that should initially appear as shown in the exhibit. Mr. King, the
president of the company, is the only employee who does not have a manager. In the trigger, you
declare a variable called rg_emps that is of the RECORDGROUP data type. You will use this record
group to populate the tree. You use the following code to create the record group: rg_emps :=
Create_Group_From_Query('rg_emps', 'select 1, level, last_name, NULL, to_char(employee_id)
from employees connect by prior employee_id = manager_id start with manager_id is null'); You
then programmatically populate the record group, and then populate the tree with the record
group. You run the form to test it. Will the tree initially appear as shown? If not, why not?
A.Yes, the tree will appear as shown.
B.No. The first element selected in the select statement should be 4 because you want four levels of the
tree to be displayed.
C.No. You should eliminate the last element selected in the select statement, because you do not want to
display the employee ID.
D.No. The "connect by" statement should be "connect by prior manager_id = employee_id".
Correct:A
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.18 Which two statements correctly describe the relationship between a content canvas and a
window? (Choose two.)
A.Only one content canvas can be associated with a window.
B.Only one content canvas at a time can appear in a window.
C.One or more content canvases can be associated with a window.
D.A content canvas can be associated with two or more windows.
E.A content canvas cannot be larger than the window with which it is associated.
F.A maximum of two content canvases can appear in a window at the same time.
Correct:B C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.19 In the Orders form you define five LOVs, and you create one button to be used to display any of
the LOVs. The button is enabled only when the user navigates to a field with an attached LOV. If
the user supplies only part of the required input data, the LOVs use that input as search criteria to
automatically reduce the LOV contents. If the LOVs hold only one value that can possibly match
user-supplied input, then the LOVs auto-complete the input field and are not displayed. Which
built-in and properties should you use to display the LOVs?
A.Use the List_Values(RESTRICT) built-in, and set the Mouse Navigate property value to NO.
B.Use the List_Values(RESTRICT) built-in, and set the Mouse Navigate property value to YES.
C.Use the List_Values(NO_RESTRICT) built-in, and set the Mouse Navigate property value to NO.
D.Use the List_Values(NO_RESTRICT) built-in, and set the Mouse Navigate property value to YES.
E.Use the Show_LOV built-in, and set the Mouse Navigate property value to YES.
F.Use the Show_LOV built-in, and set the Mouse Navigate property value to NO.
Correct:A
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
NO.20 Your company assigns three possible credit ratings to customers: Poor, Good, and Excellent
(represented numerically by 1, 2, and 3). The DBA has just added a RATING column to the
CUSTOMERS table and has asked you to add an item to your form so that credit ratings can be
recorded. To restrict data entry clerks to one of these three values, you decide to create a radio
group for the Rating item. You want to allow for an undetermined (Null) credit rating, and users
should be able to update the credit rating from a value to an undetermined rating. How can you
implement this?
A.Create three radio buttons for each of the credit ratings, and set the Mapping of Other Values for the
radio group to Null.
B.Create three radio buttons for each of the credit ratings, and set the Mapping of Other Values for the
radio group to one of the credit rating values.
C.Create four radio buttons, and leave blank the value for the undetermined credit rating.
D.Choose a different type of input item, because radio groups do not allow entry and update of null values.
Correct:C
Oracle examen 1Z0-141 1Z0-141 examen 1Z0-141
Pour vous laisser savoir mieux que la Q&A Oracle 1Z0-141 produit par Pass4Test est persuadante, le démo de Q&A Oracle 1Z0-141 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Oracle 1Z0-141 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
没有评论:
发表评论