Vous allez choisir Pass4Test après essayer une partie de Q&A IBM 000-994 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification IBM 000-994.
Le test IBM 000-994 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test IBM 000-994 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat IBM 000-994 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test IBM 000-994 avec l'aide de Pass4Test.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test IBM 000-994.
Le test de Certification IBM 000-994 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Code d'Examen: 000-994
Nom d'Examen: IBM (IBM WebSphere MQ V6.0,System Administration)
Questions et réponses: 104 Q&As
Pass4Test vous promet de vous aider à passer le test IBM 000-994, vous pouvez télécharger maintenant les Q&As partielles de test IBM 000-994 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Le Certificat de IBM 000-994 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification IBM 000-994, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 000-994 sans aucun éffort, en même temps, le test de IBM 000-994 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test IBM 000-994 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Bien qu'il ne soit pas facile à réussir le test IBM 000-994, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test IBM 000-994, mais encore à vous aider d'économiser votre temps.
000-994 Démo gratuit à télécharger: http://www.pass4test.fr/000-994.html
NO.1 Which parameter setting on the server connection channel requires a WebSphere MQ Client
application to have personal digital certificates?
A.CONVERT(YES)
B.SECURITY(YES)
C.SSLCAUTH(YES)
D.SSLCAUTH(REQUIRED)
Correct:D
IBM 000-994 examen 000-994
NO.2 What service object can utilize the MQSC script command DISPLAY SVSTATUS to display the
status of running service objects?
A.COMMAND object
B.LISTENER object
C.SERVER object
D.QUEUE object
Correct:C
IBM 000-994 examen 000-994
NO.3 A LINUX Queue Manager was in the middle of processing a large unit of work when the server's
power supply was interrupted. The power problem has been repaired and the server has restarted.
What will the WebSphere MQ System Administrator need to do to ensure any uncommitted
Persistent Messages are processed?
A.Contact the application team and ask them to resend the last batch of messages
B.Use the CHECKPT function to add or delete a record in the BSDS checkpoint queue
C.Delete the Log records written since the last checkpoint
D.Nothing, as the uncommitted persistent messages put or got in a transaction are rolled back during
restart
Correct:D
IBM 000-994 examen 000-994
NO.4 An AIX WebSphere MQ queue manager 'QM1' owns a channel 'QM1.TO.QM2'. The parameters of
the channel are as follows: CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) ALTDATE(2005-09-26)
ALTTIME(16.51.53) BATCHHB(0) BATCHINT(0) BATCHSZ(50) COMPHDR(NONE) COMPMSG(NONE)
CONNAME(QM2) CONVERT(NO) DESCR(Sender Channel to QM2) DISCINT(6000) HBINT(300)
KAINT(AUTO) LOCLADDR( ) LONGRTY(999999999) LONGTMR(1200) MAXMSGL(4194304)
MCANAME( ) MCATYPE(PROCESS) MCAUSER( ) MODENAME( ) MONCHL(QMGR) MSGDATA( )
MSGEXIT( ) NPMSPEED(FAST) PASSWORD( ) RCVDATA( ) RCVEXIT( ) SCYDATA( )
SCYEXIT(svr_sec_exit2(ChannelExit))) SENDDATA( ) SENDEXIT( ) SEQWRAP(999999999)
SHORTRTY(10) SHORTTMR(60) SSLCIPH( ) SSLPEER( ) STATCHL(QMGR) TPNAME( )
TRPTYPE(TCP) USERID( ) XMITQ(QM2) The remote server has just been upgraded and the Queue
Manager rebuilt. Unfortunately, all of the WebSphere MQ objects where only defined with the
default parameters. The 'QM1.TO.QM2' channel is started and its status is "RETRYING". Which of
the following actions is most likely to correct the problem with the channel pair?
A.Set the receiver channel's message channel agent user attribute correctly
B.Set the receiver channel's CipherSpecs attribute correctly
C.Set the receiver channel's Security Exit attribute correctlyC.Set the receiver channel's Security Exit
attribute correctlyC.Set the receiver channel's Security Exit attribute correctly
D.Clear all messages from the QM2 Transmission QueueD.Clear all messages from the QM2
Transmission QueueD.Clear all messages from the QM2 Transmission Queue
Correct:C
IBM 000-994 examen 000-994
NO.5 What attribute is required on the ALTER CHANNEL(Channel Name) command?
A.CONNAME
B.CHLTYPE
C.TRPTYPE
D.XMITQ
Correct:B
IBM 000-994 examen 000-994
NO.6 Which two of the following are services provided by the SSL features of WebSphere MQ?
A.Confidentiality
B.Application-Level Security
C.Message Compression
D.Data Recovery
E.Data Integrity
Correct:A E
IBM 000-994 examen 000-994
NO.7 What userid or group always has access to all WebSphere MQ Objects on UNIX platforms?
A.mqadmin
B.wmqadmin
C.mqm
D.root
Correct:C
IBM 000-994 examen 000-994
NO.8 The message flow performance between two Queue Managers is slower than expected. An
application is using a MQPUT call with parameter "MQPER_PERSISTENCE_AS_Q_DEF". The
messages are put onto a local Remote Queue. The properties are detailed below. The Application
messages are not required to survive system failures or restart of the queue managers. dis
qremote('MyAppQueue') all AMQ8409: Display Queue details. QUEUE(MyAppQueue)
TYPE(QREMOTE) ALTDATE(2005-09-21) ALTTIME(13.10.46) CLUSNL( ) CLUSTER( ) CLWLPRTY(3)
CLWLRANK(3) DEFBIND(OPEN) DEFPRTY(5) DEFPSIST(YES) DESCR( My Application Message
Queue on Remote Server) PUT(ENABLED) RQMNAME( ) RNAME(MyAppQueue) SCOPE(QMGR)
XMITQ(QM2) What is the best MQSC command the WebSphere MQ Administrator can use to
improve the message flow performance between the two Queue Managers?
A.No command is valid, as this is an application tuning issue.
B.ALTER QREMOTE('MyAppQueue') CLWLRANK(9)
C.ALTER QREMOTE('MyAppQueue') DEFPRTY(9)
D.ALTER QREMOTE('MyAppQueue') DEFPSIST(NO)
Correct:D
IBM 000-994 examen 000-994
NO.9 A Unix Server has just restarted after a media failure. When the queue manager startup
command was entered, the error message "QUEUE MANAGER UNAVAILABLE" was returned.
Which of the following is the most likely cause of the problem?
A.The mqs.ini does not reference the queue manager with the correct information for locating its files.
B.During the media failure, the Queue Manager was dropped from the queue-sharing group.
C.During the media failure, the Queue Manager was suspended from processing messages.
D.The 'mqm' User Group was damaged during the media failure.
Correct:A
IBM 000-994 examen 000-994
NO.10 The registry entries of a Windows Queue Managers named 'QM2' have been corrupted. While
attempting to start QM2, WebSphere MQ is unable to read the "LogPath' stanza. If WebSphere MQ
is installed in the \IBM\WebSphere MQ\ directory, then in which directory will the AMQERR01.LOG
be updated as error messages are generated?
A.In the \var\mqm\qmgrs\QM2\errors subdirectory
B.In the \IBM\WebSphere MQ\qmgrs\@SYSTEM\errors subdirectory
C.In the \IBM\WebSphere MQ\errors subdirectory
D.In the \IBM\WebSphere MQ\qmgrs\QM2\errors subdirectory
Correct:C
IBM 000-994 examen 000-994
NO.11 A company has a Queue Manager configured with Linear Logging enabled. The log files are
mounted on a separate disk, the old log files are regularly archived to ensure sufficient disk space.
What procedure should the WebSphere MQ Administrator follow after altering an empty local
queue to ensure this change is not lost by a media failure before the Queue Manager is next
restarted?
A.Recreate the Queue Manager to use Circular Logging.
B.Increase the frequency of the regularly archiving of the log files.
C.Media images are recorded automatically by the Queue Manager, the WebSphere MQ System
Administer does not need a procedure.
D.Use the control command to record the new local queue's definition.
Correct:D
IBM 000-994 examen 000-994
NO.12 A WebSphere MQ System Administrator enters this MQSC command "dis
chstatus(QM1.TO.QM2)" on a UNIX Queue Manager and receives this output. AMQ8417: Display
Channel Status details. CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) CONNAME(QM2) CURRENT
RQMNAME( ) STATUS(RETRYING) SUBSTATE( ) XMITQ(QM2) Administrator needs to locate more
detailed information on the reason for the retrying channel status? Where can this information be
found?
A.In the system error log directory
B.In the log file AMQERR04.LOG
C.In the log file MQERRLG1
D.In the appropriate queue manager's errors log files
Correct:D
IBM 000-994 examen 000-994
NO.13 Which commands would disable the Object Authority Manager on AIX for Queue Manager
"BROADWAY"?
A.endmqm -c BROADWAY; export MQSNOAUT=yes; strmqm BROADWAY;
B.strmqm BROADWAY; export MQSNOAUT=yes
C.export MQSNOAUT=yes; crtmqm BROADWAY
D.export MQSNOAUT=yes; strmqm BROADWAY
Correct:C
IBM 000-994 examen 000-994
NO.14 An application development team is coding a tool to send PCF commands to a WebSphere MQ
Queue Manager on HP-UX . The new tool is to administer WebSphere MQ, but the application
developers do not want to write PCF messages and require an easy method of handling error
conditions. What is the best IBM provided application programming interface called to perform
this function?
A.WebSphere MQ Administration Interface
B.Message Queuing Interface
C.Application Messaging Interface
D.PCF Programming Interface
Correct:A
IBM 000-994 examen 000-994
NO.15 A company is using only WebSphere MQ V6.0 in their complex distributed network. All
messages sent by one application are missing. The WebSphere MQ administrator suspects that
due to an application programming error, the messages are caught in an infinite loop. Which of
the following methods will best help the WebSphere MQ administrator track down the missing
messages?
A.Use Trace-route messaging
B.Enable Activity recording
C.Run the strmqtrc control command to enable tracing on all Queue Managers
D.Check all the Dead Letter Queues on all the Queue Managers
Correct:A
IBM 000-994 examen 000-994
NO.16 A WebSphere MQ System Administrator desires to change the location of the log files only for
existing UNIX Queue Manger "saturn.queue.manager". The new location of the log files is to be
"/home/mqm/logs". What is the best way to accomplish this task?
A.Edit file /var/mqm/mqs.ini so "LogDefaultPath=/home/mqm/logs"
B.Edit file /var/mqm/qmgrs/saturn!queue!manager/qm.ini so "LogPath=/home/mqm/logs"
C.Issue control command "amqmdain reg saturn.queue.manager -c add -s Log -v LogPath value
=/home/mqm/logs"
D.Issue the control command "crtmqm saturn.queue.manager -ld /home/mqm/logs"
Correct:B
IBM 000-994 examen 000-994
NO.17 What is the best way to protect WebSphere MQ message data from being read by unauthorized
parties while it travels over an unsecured network?
A.Configure the WebSphere Channels to use SSL security
B.Allow only locally binding applications instead of WebSphere MQ Clients
C.Set the "MQSNOAUT" variable to FALSE
D.WebSphere MQ data can never be read by unauthorized parties
Correct:A
IBM 000-994 examen 000-994
NO.18 Within a WebSphere MQ based application, all of the following types of reports are available
EXCEPT:
A.Confirm on Arrival (COA)
B.Confirm on Delivery (COD)
C.Receiving Application Processing (RAP)
D.Expiry
Correct:C
IBM 000-994 examen 000-994
NO.19 Which command will reload the copy of the key repository which is held in memory, without
restarting a channel process?
A.REFRESH SECURITY TYPE(KEY)
B.REFRESH SECURITY TYPE(SSL)
C.RESET SECURITY TYPE(KEY)
D.RESET SECURITY TYPE(SSL)
Correct:B
IBM 000-994 examen 000-994
NO.20 A trigger monitor needs to be started and stopped when the queue manager starts and ends.
Where in the WebSphere MQ Explorer V6.0 tooling can this trigger monitor service be defined?
A.On the advanced tab
B.On the listeners tab
C.On the queue manager properties
D.On the services tab
Correct:D
IBM 000-994 examen 000-994
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test IBM 000-994. Cet outil de formation est convenable pour les candidats de test IBM 000-994. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
没有评论:
发表评论