Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Juniper JN0-643, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Code d'Examen: JN0-643
Nom d'Examen: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
Questions et réponses: 103 Q&As
Le test Juniper JN0-643 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Juniper JN0-643 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Juniper JN0-643.
Le Certificat Juniper JN0-643 est un passport rêvé par beaucoup de professionnels IT. Le test Juniper JN0-643 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Juniper JN0-643. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Juniper JN0-643 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Juniper JN0-643 pour prendre un essai.
JN0-643 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-643.html
NO.1 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D
Juniper certification JN0-643 certification JN0-643
NO.2 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C
Juniper certification JN0-643 certification JN0-643 certification JN0-643 JN0-643
NO.3 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B
Juniper certification JN0-643 JN0-643 examen JN0-643
NO.4 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D
certification Juniper JN0-643 examen certification JN0-643 certification JN0-643 JN0-643 examen
NO.5 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C
certification Juniper JN0-643 examen certification JN0-643 JN0-643 JN0-643 JN0-643 examen
NO.6 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D
Juniper certification JN0-643 JN0-643 JN0-643 JN0-643
NO.7 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A
Juniper JN0-643 certification JN0-643 certification JN0-643 JN0-643
NO.8 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C
certification Juniper JN0-643 JN0-643 examen JN0-643 examen
NO.9 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C
Juniper JN0-643 JN0-643 JN0-643 JN0-643
NO.10 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
certification Juniper JN0-643 examen certification JN0-643 JN0-643 examen
NO.11 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A
Juniper examen certification JN0-643 certification JN0-643
NO.12 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C
certification Juniper JN0-643 JN0-643 examen JN0-643
NO.13 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B
Juniper examen JN0-643 examen JN0-643 certification JN0-643
NO.14 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D
Juniper examen certification JN0-643 JN0-643 examen JN0-643
NO.15 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C
Juniper JN0-643 examen JN0-643
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Juniper JN0-643. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Juniper JN0-643.
没有评论:
发表评论