Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Symantec 250-251, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Symantec 250-251. Peut-être d'obtenir le Certificat Symantec 250-251 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Symantec 250-251 est une bonne examination. Mais c'est difficile à passer le test Symantec 250-251. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Symantec 250-251. Cet outil de formation est convenable pour les candidats de test Symantec 250-251. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Code d'Examen: 250-251
Nom d'Examen: Symantec (Administration of HA Solutions for UNIX (VCS 5.0))
Questions et réponses: 208 Q&As
Vous avez aussi la possibilité à réussir le test Symantec 250-251. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
Vous n'avez besoin que de faire les exercices à propos du test Symantec 250-251 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
Est-ce que vous vous souciez encore de réussir le test Symantec 250-251? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Symantec 250-251.
250-251 Démo gratuit à télécharger: http://www.pass4test.fr/250-251.html
NO.1 Which components are installed when you execute the installvcs script? (Choose two.)
A.bundled agents
B.database agents
C.cluster file system
D.GAB driver
E.cluster volume manager
Answer:A D
Symantec examen certification 250-251 250-251
NO.2 During a test of a NIC resource the VCS engine log indicates that the service group and the IP resource
enter the FAULTED state on all systems in the cluster. The NIC resource enters the ONLINE state after
the root cause of the fault is corrected. Which default attribute setting allows the service group to attempt
to start without manual intervention?
A.AutoStart
B.AutoClear
C.AutoRestart
D.AutoFailover
Answer:C
certification Symantec 250-251 250-251 examen
NO.3 Which attribute enables VCS to bring a resource online after it goes offline unexpectedly and before
faulting the resource?
A.RestartLimit
B.OnlineRestartLimit
C.AutoRestartLimit
D.OnlineRetryLimit
Answer:A
Symantec certification 250-251 250-251 certification 250-251 250-251 250-251
NO.4 You are adding a system to a running cluster. You have successfully performed these steps on the
system that you are adding: 1. installed, configured, and tested all application resources required 2.
installed VCS 3. configured and started VCS communications (LLT and GAB) What is the next step that
you perform?
A.update the resource attributes to enable resources to run on the new system
B.update the service group attributes to enable groups to run on the new system
C.change the cluster attribute for VCS user names to match accounts on the new system
D.change the owner of the system attributes so that all cluster systems are the same
Answer:B
certification Symantec certification 250-251 250-251 250-251 certification 250-251
NO.5 Which VCS resource attribute setting prevents VCS from interpreting a Monitor entry point timeout as a
resource fault?
A.MonitorFault=0
B.MonitorFaultTimeout=240
C.FaultMonitor=240
D.FaultOnMonitor=4
Answer:D
Symantec certification 250-251 250-251 250-251 examen
NO.6 Which feature of VCS can prevent overloading of a system's resources in the event of service group
failover?
A.Parallel Service Groups
B.Capacities
C.Limits
D.Load Failover Policy
Answer:C
Symantec 250-251 examen 250-251 250-251
NO.7 What is the default level of authorization of a new VCS user?
A.Cluster Administrator
B.Cluster Operator
C.Cluster Guest
D.Group Administrator
E.Group Operator
Answer:C
certification Symantec certification 250-251 certification 250-251 250-251
NO.8 Which attributes impact service group failover? (Choose three.)
A.FailOver
B.AutoFailOver
C.Faulted
D.FaultPropagation
E.Frozen
Answer:B D E
certification Symantec 250-251 certification 250-251 certification 250-251
NO.9 Which procedure must be followed to remove the resource type TypeA from an active VCS cluster?
A.remove all resources of TypeA, remove TypeA, and remove TypeA packages
B.remove TypeA, then execute the hatype esync command
C.stop VCS, remove all resources of TypeA, and start VCS
D.execute the hatype -remove command which will remove all the resources
Answer:A
Symantec 250-251 examen 250-251 examen
NO.10 Which resource type attributes can be set in order to tune VCS failover characteristics? (Choose two.)
A.AutoStart
B.ConfInterval
C.ConfTimeout
D.MonitorInterval
E.OfflineMonitorInterval
Answer:B D
Symantec examen 250-251 250-251 examen
NO.11 Which directive in the llttab file defines a network interface for a heartbeat?
A.nic
B.link
C.heartbeat
D.hbdev
Answer:B
Symantec 250-251 certification 250-251
NO.12 Which conditions are recommended for a successful VCS patch installation? (Choose two.)
A.The clustered application must be shut down.
B.VCS must be shut down only on the server being patched.
C.VCS must be shut down on all cluster nodes.
D.GAB and LLT must be shut down on all cluster nodes.
E.GAB and LLT must remain running and connected.
Answer:C D
certification Symantec certification 250-251 250-251 examen 250-251 250-251 examen 250-251
NO.13 VCS is to be installed in a secure environment where remote installation between systems is
impossible. The VCS configuration parameters were captured in a file using the installation script on the
first system. What can be used to read the contents of the configuration file when executing locally on the
remaining systems?
A.-autoconfig
B.-configfile
C.-vcsconfig
D.-responsefile
Answer:D
Symantec examen 250-251 250-251 250-251
NO.14 Which statement is true about the violation trigger?
A.A violation trigger must be written as a shell script.
B.A violation trigger and notification are mutually exclusive.
C.A violation trigger is dependent on notification to work.
D.A violation trigger is automatically executed when events occur.
Answer:D
Symantec 250-251 250-251 examen 250-251 examen certification 250-251
NO.15 You are installing a VCS upgrade that does not require a system reboot, but does require a VCS
restart. Which method maximizes user access to the clustered applications during the upgrade?
A.use the VCS rolling upgrade option which restarts VCS transparently
B.stop VCS using the orce option and then restart VCS on each system
C.evacuate service groups while upgrading one system at a time
D.stop VCS using the all option and then restart VCS on each system
Answer:B
certification Symantec 250-251 examen 250-251 certification 250-251 250-251 250-251
NO.16 When preparing to install VCS on the S1 and S2 systems, what should you do to verify software
compatibility? (Choose three.)
A.check the VCS release notes for supported software
B.run the installvcs recheck S1 S2 command
C.let the installvcs script check compatibility at install
D.run the installvcs ompat S1 S2 command
E.check the Symantec Enterprise Support website
Answer:A B E
Symantec examen 250-251 examen 250-251 250-251 250-251 examen 250-251 examen
NO.17 Which resource type attributes can be set in order to tune VCS failover characteristics? (Choose two.)
A.Flags
B.RestartLimit
C.ToleranceLimit
D.OfflineTimeout
E.OfflineMonitorInterval
Answer:B C
certification Symantec 250-251 examen certification 250-251
NO.18 Which text files are created at the end of a successful run of installvcs -installonly? (Choose three.)
A.log
B.response
C.gabtab
D.llttab
E.summary
Answer:A B E
certification Symantec certification 250-251 250-251 250-251 examen certification 250-251
NO.19 Which types of monitoring can be performed on Oracle resources? (Choose two.)
A.detail monitoring
B.basic level monitoring
C.kernel level monitoring
D.specific monitoring
E.service monitoring
Answer:A B
certification Symantec certification 250-251 certification 250-251
NO.20 Under which condition can a service group be AutoDisabled?
A.when hashadow cannot restart HAD on a system
B.when the system is in a jeopardy membership
C.when a firm service group dependency exists between two service groups and the parent service group
fails
D.when a firm service group dependency exists between two service groups and the child service group
fails
Answer:A
Symantec examen 250-251 250-251 examen
Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Symantec 250-251, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.
没有评论:
发表评论