Un bon choix de l'outil à se former est le point essentiel à passer le test Alcatel-Lucent 4A0-106, et les documentations à propos de rechercher le test Alcatel-Lucent 4A0-106 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Si vous vous inscriez le test Alcatel-Lucent 4A0-106, vous devez choisir une bonne Q&A. Le test Alcatel-Lucent 4A0-106 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Alcatel-Lucent 4A0-106, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.
Le test Alcatel-Lucent 4A0-106 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Alcatel-Lucent 4A0-106 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Si vous traviallez dur encore pour préparer le test de Alcatel-Lucent 4A0-106 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Alcatel-Lucent 4A0-106.
Pass4Test est un fournisseur de formation pour une courte terme, et Pass4Test peut vous assurer le succès de test Alcatel-Lucent 4A0-106. Si malheureusement, vous échouez le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit avant de choisir Pass4Test. Au moment là, vous serez confiant sur Pass4Test.
Code d'Examen: 4A0-106
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Virtual Private Routed Networks)
Questions et réponses: 145 Q&As
4A0-106 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-106.html
NO.1 In a VPRN the PE device is configured to run which of the following protocols? (Choose three.)
A. MP-BGP for exchanging customer routes with other PEs
B. A routing protocol for exchanging customer routes with the CE
C. MPLS for exchanging labels with other provider core devices
D. MPLS for exchanging labels with the CE devices
E. Targeted LDP for exchanging VPRN labels with other PE devices
F. A label signaling protocol for defining transport tunnels between PE and CE devices
Answer: ABC
Alcatel-Lucent 4A0-106 4A0-106 examen certification 4A0-106
NO.2 Which of the following statements are true regarding P devices in an MPLS VPRN? (Choose two.)
A. Participate in service provider core routing
B. P devices are not required to be MPLS enabled. MPLS is only required on the PE devices
C. Run a common routing protocol with the CE router
D. Must support MP-BGP
E. Do not have any connections to the CE
F. Must be aware of the VPRNs
Answer: AE
Alcatel-Lucent certification 4A0-106 certification 4A0-106
NO.3 What are the main functions of a Layer 3 VPN? (Choose three).
A. Distributing customer routing information between sites
B. Forwarding customer data packets
C. Providing an integrated billing solution
D. Maintaining separation between distinct customer networks
E. Allowing the implementation of Layer 3 devices in the provider core
Answer: ABD
Alcatel-Lucent 4A0-106 4A0-106 4A0-106
NO.4 When a Service Provider offers VPRN services to its customers, which of the following functions are
expected to be the responsibility of the Service Provider? (Choose three)
A. Distributing the customer generated labels between sites
B. Distributing the customer routing information between sitesDistributing the customer? routing
information between sites
C. Forwarding the customer originated data packets to the appropriate destination
D. Forwarding the provider originated data packets to the appropriate customer site
E. Providing secure layer 3 routing exchange between sites
Answer: BCE
Alcatel-Lucent 4A0-106 examen 4A0-106 4A0-106
NO.5 What are the two primary problems the service provider must consider when providing traditional
Layer 3 VPN services using only a single common routing table in the provider core? (Choose two)
A. Memory exhaustion in the provider core
B. Route leaking between the customer networks
C. CPU utilization for route processing
D. Unwanted packet forwarding between customer networks
Answer: BD
Alcatel-Lucent 4A0-106 4A0-106 examen 4A0-106
NO.6 Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to
____________________.
A. Identify the egress PE in the MPLS domain
B. Signal the egress VPRN ID
C. Identify the ingress PE in the MPLS domain
D. transport route updates between PEs
Answer: A
Alcatel-Lucent 4A0-106 examen 4A0-106 examen
NO.7 In a traditional layer 3 VPN which of the following will be an issue when there is overlapping address
space between two customers? Choose the best answer.
A. There will be increased memory usage on the PE
B. There will be increased CPU utilization on the PE
C. The CE will reject the overlapping prefix
D. The PE will not recognize the prefixes as being different
E. There is no issue with overlapping address space in a traditional Layer 3 VPN
Answer: D
Alcatel-Lucent certification 4A0-106 4A0-106 4A0-106 4A0-106 examen 4A0-106
NO.8 Complete the following statement. In a VPRN, the label signaled by RSVP-TE is used to
____________________.
A. Identify the egress PE in the MPLS domain
B. Signal the egress VPRN ID
C. Identify the ingress PE in the MPLS domain
D. transport route updates between PEs
Answer: A
Alcatel-Lucent 4A0-106 examen 4A0-106
NO.9 Which of the following terms also correctly describes a Layer 3 VPN? (Choose three)
A. VPRN
B. BGP/MPLS VPN
C. VLL
D. VPLS
E. IP-VPN
F. ePipe
Answer: ABE
Alcatel-Lucent examen 4A0-106 4A0-106 4A0-106
NO.10 Choose the answer that best completes the following sentence. The CE device is typically configured
with ___________________________.
A. A single routing protocol for exchanging routes with both the internal customer routers and with the PE
B. MP-BGP to exchange routes with the PE.
C. MPLS and a routing protocol for the exchange of labels and routes with the PE
D. MPLS for exchanging labels with other CE devices
E. A routing protocol for exchanging routes with the internal customer routers and a routing protocol for
exchanging routes with the PE
Answer: E
certification Alcatel-Lucent 4A0-106 4A0-106 examen
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Alcatel-Lucent 4A0-106 de Pass4Test.
没有评论:
发表评论