Beaucoup de gens trouvent difficile à passer le test IBM A2090-617, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test IBM A2090-617 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Pass4Test vous offre un choix meilleur pour faire votre préparation de test IBM A2090-617 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de IBM A2090-617 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test IBM A2090-617 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
On doit faire un bon choix pour passer le test IBM A2090-617. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM A2090-617 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Code d'Examen: A2090-617
Nom d'Examen: IBM (Assessment: DB2 10 System Administration for z/OS)
Questions et réponses: 126 Q&As
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification IBM A2090-617. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification IBM A2090-617.
Le test IBM A2090-617 est bien populaire dans l'Industrie IT. Mais ça coûte beaucoup de temps pour bien préparer le test. Le temps est certainemetn la fortune dans cette société. L'outil de formation offert par Pass4Test ne vous demande que 20 heures pour renforcer les connaissances essentales pour le test IBM A2090-617. Vous aurez une meilleure préparation bien que ce soit la première fois à participer le test.
A2090-617 Démo gratuit à télécharger: http://www.pass4test.fr/A2090-617.html
NO.1 You start your DB2 subsystem and check the messages in the MSTR address space. DB2 issues
message DSNJ120I indicating that it detected unequal timestamps in the BSDSs. What is the required
action to allow DB2 to start successfully?
A. DB2 restart is halted and an open reply lets you use the -RECOVER BSDS command to fix the
problem.
B. Use the VSAM REPRO utility to overwrite the older BSDS with the most recent one and issue START
DB2 again.
C. DB2 shuts down when this problem occurs. You must issue -START DB2 again and DB2 will try to
re-synchronize the BSDSs now.
D. No action is needed. DB2 automatically tries to re-synchronize and continues with the restart if the
re-synchronization was successful.
Answer: D
IBM A2090-617 A2090-617 examen A2090-617 A2090-617 examen
NO.2 Which limiting attribute CANNOT be included in the definition of a trusted context?
A. A DB2 SSID.
B. An IPv4 address.
C. An IPv6 address.
D. A secure domain name.
Answer: A
IBM examen A2090-617 A2090-617 examen
NO.3 What does the command -ALTER GROUPBUFFERPOOL(GBP1) RATIO(5.6) do?
A. Changes the ratio of directory entries to the local cache entries (LCE).
B. Changes the desired ratio of the number of lock entries to the number of data pages in the group buffer
pool.
C. Changes the desired ratio of the number of directory entries to the number of data pages in the group
buffer pool.
D. Changes the desired number of the data pages cast out to those that remain in the group buffer pool
when the group buffer pool checkpoint occurs.
Answer: C
IBM A2090-617 A2090-617 examen
NO.4 Assume that you have implemented identity propagation and that the distributed user name is 'MARY'.
You have mapped this user name to the RACF user ID 'DB2USER1'. Which statement is true?
A. 'MARY' is authenticated by RACF.
B. 'DB2USER1' must be defined on the remote system.
C. Remote requests execute with the authority of 'MARY'.
D. Audit records for this transaction contains both RACF user ID 'DB2USER1' and the distributed user
'MARY'.
Answer: D
IBM examen A2090-617 examen certification A2090-617 A2090-617
NO.5 DB2 10 enhances the profile table monitoring facility to support the filtering and threshold monitoring for
the number of connections using which categories?
A. All local and DRDA connections.
B. Collection IDs and IP addresses.
C. Role and Authorization Identifiers.
D. Product Identifiers and Package Names.
Answer: C
IBM A2090-617 examen A2090-617 A2090-617 examen
NO.6 Which directory table space CANNOT be REORGed in DB2 10?
A. DSNDB01.SPT01
B. DSNDB01.SCT02
C. DSNDB01.SYSUTILX
D. DSNDB01.SYSLGRNX
Answer: C
IBM A2090-617 A2090-617
NO.7 The standard audit trace has limitations. Which statement is true?
A. You can audit the catalog tables.
B. You can audit every access to a table.
C. You can audit all utilities including DSN1.... ones.
D. You can start a specific audit trace at DB2 startup.
Answer: D
IBM A2090-617 examen certification A2090-617 certification A2090-617
NO.8 What is NOT required for recovery of the DB2 catalog at a disaster recovery site?
A. All catalog table spaces.
B. IBM defined indexes on the catalog.
C. XML objects for the catalog table spaces.
D. LOB objects for the catalog table spaces.
Answer: C
IBM A2090-617 A2090-617 examen A2090-617
NO.9 In order to separate DB2 security administration duties from DB2 system administration duties, which
step(s) must be performed?
A. Set both SECADM system parameters to an authorization ID and Role.
B. Specify YES to SEPARATE_ SECURITY and set one SYSADM system parameter to an authorization
ID or Role.
C. Specify YES to SEPARATE_ SECURITY and set one SECADM system parameter to an authorization
ID or Role.
D. Specify YES to PROTECT parameter and set one SECADM system parameter to an
authorization ID or Role.
Answer: C
certification IBM A2090-617 A2090-617 examen A2090-617
NO.10 To cancel any type of thread using a -CANCEL THREAD command what information is needed?
A. The token of the thread to be canceled.
B. The luwid of the thread to be canceled.
C. The connection name of the thread to be canceled.
D. The correlation name of the thread to be canceled.
Answer: A
IBM certification A2090-617 A2090-617 examen A2090-617 A2090-617 A2090-617 examen
NO.11 To satisfy a requirement to track and report on the administrative changes made by users with system
DBADM authority, which DB2 catalog table must be modified to enable this requirement.?
A. SYSIBM.SYSDBAUTH
B. SYSIBM.SYSRESAUTH
C. SYSIBM.SYSUSERAUTH
D. SYSIBM.SYSAUDITPOLICIES
Answer: D
certification IBM certification A2090-617 A2090-617 examen A2090-617 examen
NO.12 Which of the following statements is NOT correct regarding the dynamic statement cache?
A. The dynamic statement cache resides in an above-the-bar pool.
B. Performance problems can occur if the dynamic statement cache is too small.
C. The REOPT(VARS) bind option is necessary in order to store the access path for a dynamic SQL
statement in the dynamic statement cache.
D. When updating statistics for an object manually, you need to invalidate statements in the dynamic
statement cache that refer to this object using RUNSTATS REPORT NO UPDATE NONE against the
object.
Answer: C
IBM examen A2090-617 A2090-617 certification A2090-617 certification A2090-617 A2090-617 examen
NO.13 The DB2 command -SET SYSPARM lets you change subsystem parameters while DB2 is up.
What is the correct syntax for loading a different DSNZPARM load module?
A. -SET SYSPARM LOAD
B. -SET SYSPARM RELOAD
C. -SET SYSPARM(dsnzparm name)
D. -SET SYSPARM LOAD(dsnzparm name)
Answer: D
IBM examen A2090-617 A2090-617
NO.14 Which statement describes a DB2 ROLE?
A. A role is a privilege.
B. A role is a USERID.
C. A role is a RACF entity.
D. A role is a database entity.
Answer: D
IBM certification A2090-617 certification A2090-617 A2090-617 examen
NO.15 When a data sharing member fails, what is the final state of the connections to the DB2 lock structure
in the coupling facility?
A. It is finally marked as FAILING.
B. It is immediately marked as FAILED PERSISTENT for the failing member.
C. It is marked as FAILING and then finally changed to FAILED PERSISTENT upon receiving
DiscFailCon from all members.
D. It is marked as FAILED PERSISTENT and then finally changed to FAILING upon receiving
DiscFailCon from all members.
Answer: C
IBM A2090-617 examen A2090-617 examen A2090-617 examen
NO.16 What is the process to automatically start an audit policy at DB2 startup?
A. Specify DSNZPARM subsystem parameters AUDITST = *
B. Specify DSNZPARM subsystem parameter AUDITST = YES
C. Specify DSNZPARM subsystem parameter TRACSTR = YES
D. UPDATE SYSIBM.SYSAUDITPOLICIES SET DB2START=Y for the row of the audit policy to be auto
started.
Answer: D
IBM A2090-617 examen A2090-617 A2090-617 examen A2090-617
NO.17 What process does the RESTORE SYSTEM utility NOT perform?
A. Restores logs from the log copy pool.
B. Applies logs to the data to a point in time.
C. Restores data from the database copy pool.
D. Applies only logs to the data if LOGONLY is specified.
Answer: A
IBM examen certification A2090-617 A2090-617
NO.18 In a production DB2 subsystem, the display of database DBFW8401 shows that pages have been
added to the LPL. The indexes for the database have the COPY NO attribute.
Which utility is used to remove these pages from the LPL status?
A. REPAIR
B. RECOVER
C. CHECK INDEX
D. REBUILD INDEX
Answer: D
IBM A2090-617 certification A2090-617 A2090-617 examen
NO.19 You have implemented hash access on a production table. In order to optimize hash access
performance you need to monitor the storage space utilized by hash access. How would you accomplish
this?
A. View real time statistics for the table.
B. Run RUNSTATS with the UPDATE SPACE option.
C. Issue the -DISPLAY DATABASE(*) SPACENAM(*) USE command.
D. Utilize a monitoring profile using the -DISPLAY PROFILE command.
Answer: A
certification IBM A2090-617 examen certification A2090-617
NO.20 You have just defined the profile monitoring tables and related indexes using the DSNTIJSG job in the
SDSNSAMP library. In order to monitor the number of remote threads and connections you must insert
rows into the SYSIBM.DSN_PROFILE_TABLE and SYSIBM.DSN_PROFILE_ATTRIBUTES tables to
specify the monitoring functions to be used.
What is the next step in this process?
A. Issue the -START PROFILE command.
B. Issue the -DISPLAY THREAD command.
C. Issue the -START TRACE (MONITOR) command.
D. No further steps are needed. DB2 will automatically begin monitoring those DB2 threads identified in
the monitoring profile.
Answer: A
IBM A2090-617 A2090-617
Si vous voulez ne se soucier plus à passer le test IBM A2090-617, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test IBM A2090-617. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A IBM A2090-617 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
没有评论:
发表评论