Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Citrix 1Y0-A09 sans aucune doute si vous choisissez le Pass4Test.
Le test Citrix 1Y0-A09 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Citrix 1Y0-A09 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Citrix 1Y0-A09 juste avec la Q&A de Citrix 1Y0-A09 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.
Code d'Examen: 1Y0-A09
Nom d'Examen: Citrix (Implementing Citrix XenServer 5.0)
Questions et réponses: 100 Q&As
Le test de Certification Citrix 1Y0-A09 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
1Y0-A09 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-A09.html
NO.1 Which two physical hardware configurations are supported by XenServer Enterprise Edition 5.0?
(Choose two.)
A.512GB RAM
B.256GB RAM
C.32 CPU cores
D.128 CPU cores
E.32-bit architecture
F.64-bit architecture
Answer:C F
Citrix 1Y0-A09 1Y0-A09 1Y0-A09 examen
NO.2 Scenario: An administrator is installing XenServer Enterprise Edition 5.0 in an environment. The
administrator has two disks available for storage. According to best practices, how should the
administrator configure the local disk storage repositories (SRs) during the initial XenServer installation?
A.Install XenServer on one disk and the control domain on the other disk
B.Install XenServer on one disk and the virtual machine SR on the other disk
C.Install XenServer and an in-place upgrade partition on one disk and the control domain on the other
disk
D.Install XenServer and the virtual machine SR on one disk and an in-place upgrade partition on the other
disk
Answer:B
certification Citrix 1Y0-A09 1Y0-A09
NO.3 Scenario: A company has acquired two small businesses recently. The administrator for the company
needs to create a template of a virtual machine (VM) that has Microsoft Exchange running on Microsoft
Windows Server 2003. The template will be used to create two more VMs to accommodate the recent
business expansion. In which way should the administrator create the template?
A.Take a regular snapshot of the VM
B.Create a template using an ISO image
C.Create a template VM using a Windows Server 2003 Install CD
D.Take an existing clean Windows Server 2003 VM and turn it into a template
Answer:D
Citrix examen certification 1Y0-A09 certification 1Y0-A09 1Y0-A09
NO.4 To allow for rapid deployment of XenServer hosts in a large environment, an administrator decides to
install XenServer Enterprise Edition 5.0 using a network boot process. To which type of server must the
administrator configure DHCP to communicate?
A.FTP
B.HTTP
C.TFTP
D.HTTPS
Answer:C
Citrix certification 1Y0-A09 1Y0-A09 examen
NO.5 In which scenario should an administrator choose to suspend a virtual machine (VM)?
A.Orderly shutdown of the operating system on the VM is needed
B.Memory and CPU cycles on the XenServer host need to be freed up
C.The administrator wants to store the memory image on the virtual disk of the VM
D.The administrator needs to restart the VM on the same XenServer host each time the VM is started
Answer:B
certification Citrix 1Y0-A09 examen 1Y0-A09 1Y0-A09 examen 1Y0-A09
NO.6 Which two tasks can an administrator perform using the Storage tab in XenCenter? (Choose two.)
A.Create a VM or ISO Storage tag
B.Format an NFS share using NTFS
C.Attach an NFS share to a host or pool
D.Configure a custom NetApp storage repository
Answer:C D
Citrix examen 1Y0-A09 1Y0-A09
NO.7 Scenario: An organization has a single installation of XenServer Enterprise Edition 4.0. The
administrator plans to upgrade the host to version 5.0. Which upgrade path should the administrator take?
A.Upgrade the XenServer using Emergency Mode
B.Upgrade directly from version 4.0 to version 5.0
C.Upgrade to version 4.1 and then upgrade to version 5.0
D.Upgrade XenCenter to 5.0 and use the Updates Manager
Answer:C
certification Citrix 1Y0-A09 examen 1Y0-A09 certification 1Y0-A09 1Y0-A09
NO.8 What are two differences between a Microsoft Windows virtual machine (VM) installation of the
XenServer Tools and a Linux VM installation of the XenServer Tools? (Choose two.)
A.The XenServer Tools are pre-installed on a Windows VM but NOT on a Linux VM
B.The XenServer Tools CD is automatically detected on a Windows VM but must be mounted on a Linux
VM
C.The XenServer Tools do NOT need to be installed on a Linux VM but do need to be installed on a
Windows VM
D.The XenServer Tools are installed on a Linux VM using the command line interface (CLI) but installed
on a Windows VM using the GUI installer
Answer:B D
Citrix 1Y0-A09 certification 1Y0-A09 1Y0-A09 examen 1Y0-A09
NO.9 An administrator created a template of a Microsoft Windows XP SP3 virtual machine (VM) and now
needs to modify it. How can the administrator modify the template?
A.Power on the VM template, make the changes and save the template
B.Export the template from the XenServer host, import it to another system, power it on and make the
changes
C.Put the XenServer host in Maintenance Mode, make the changes to the VM template and then exit
Maintenance Mode
D.Create a new VM based on the original template, make the changes to the new VM and turn the new
VM into the new template
Answer:D
Citrix examen 1Y0-A09 1Y0-A09 certification 1Y0-A09
NO.10 According to best practices, which step should an administrator perform before booting the installer CD
to upgrade to XenServer Enterprise Edition 5.0 from XenServer 4.x?
A.Suspend any running virtual machines
B.Delete the current server configuration
C.Re-enter the physical network configuration
D.Backup the existing virtual machines (VMs) with a VM export
Answer:D
Citrix 1Y0-A09 1Y0-A09 examen 1Y0-A09
NO.11 How much disk space is required for the control domain and guest VM storage repository in a
XenServer Enterprise Edition 5.0 installation?
A.4 GB
B.8 GB
C.16 GB
D.32 GB
Answer:C
Citrix 1Y0-A09 examen 1Y0-A09 examen 1Y0-A09 examen 1Y0-A09
NO.12 Which two steps must an administrator take to create a Microsoft Windows virtual machine using the
XenConvert Physical to Virtual (P2V) conversion tool? (Choose two.)
A.Modify device drivers
B.Reboot the physical machine
C.Run XenConvert on the physical Windows machine
D.Import the template or image into the XenServer host
Answer:C D
Citrix certification 1Y0-A09 1Y0-A09 examen 1Y0-A09 1Y0-A09
NO.13 Scenario: During the creation of a Microsoft Windows 2003 Standard Edition server virtual machine
(VM), an administrator is asked to make as many processors available as possible to allow a developer to
test a new multi-cpu application. What is the maximum number of VCPUs that an administrator can
assign to this VM?
A.2
B.4
C.8
D.16
Answer:B
certification Citrix 1Y0-A09 1Y0-A09 certification 1Y0-A09
NO.14 In which three locations could an administrator go within XenCenter to create a new virtual machine?
(Choose three.)
A.VM menu
B.Tools menu
C.New VM button
D.Templates menu
E.Add New Server button
Answer:A C D
Citrix 1Y0-A09 examen 1Y0-A09
NO.15 What are two best practices for cleaning up a virtual machine after completing a Physical to Virtual
(P2V) migration using XenConvert? (Choose two.)
A.Install XenServer Tools
B.Delete any local user accounts on the machine that are not in use
C.Remove and reinstall applications such as antivirus and anti-spyware
D.Remove any hardware related software such as management utilities and unused drivers
Answer:A D
certification Citrix 1Y0-A09 examen 1Y0-A09 examen certification 1Y0-A09 1Y0-A09 examen
NO.16 Scenario: An administrator wants to create a new virtual machine (VM) on XenServer1, which does
NOT reside in the current resource pool. The administrator wants to keep the configurations exactly the
same as those in the resource pool but does NOT want to manually configure the new VM. How can the
administrator create the new VM with the same configurations as those in the resource pool?
A.Copy the VM to a shared storage location and export it to XenServer1
B.Convert the resource pool VM to a template and start it on XenServer1
C.Make a backup of the desired VM configurations and save it to a shared storage location before
exporting it to XenServer1
D.Create a custom template of the resource pool VM and import it to XenServer1 then create a new VM
from the template on XenServer1
Answer:D
Citrix 1Y0-A09 1Y0-A09 1Y0-A09
NO.17 Where can an administrator determine when a XenServer Enterprise Edition 5.0 license will expire?
A.XenCenter
B.XenServer Tools
C.mycitrix.com web site
D.Citrix License Management Console
Answer:A
Citrix 1Y0-A09 examen 1Y0-A09 1Y0-A09 examen 1Y0-A09 certification 1Y0-A09
NO.18 An administrator must __________ on the virtual machines to return performance data to XenCenter.
(Choose the correct phrase to complete the sentence.)
A.enable logging
B.set the system alerts
C.install XenServer Tools
D.configure the management interfaces
Answer:C
Citrix certification 1Y0-A09 1Y0-A09 1Y0-A09
NO.19 Which three performance data points can an administrator locate for a virtual machine in the
Performance tab in XenCenter? (Choose three.)
A.CPU usage
B.Memory usage
C.Disk and network I/O
D.High availability status
E.VCPU resources allocated
Answer:A B C
Citrix 1Y0-A09 1Y0-A09 1Y0-A09 examen 1Y0-A09
NO.20 Scenario: An administrator is adding a new XenServer host to a pool and wants to ensure server
management connectivity. To do so, the administrator creates a new NIC bond using XenCenter. However,
after completing the task, the administrator is unable to join the server to a pool. Which step must the
administrator take before the XenServer can join the pool?
A.Configure a new network to make the bond available
B.Shut down the virtual machines that use the NIC bond
C.Reconfigure the management interface for the new XenServer host and move it back on to a physical
NIC
D.Add the IP information for the pool to the new XenServer host and reconnect the virtual network
interface to the network
Answer:C
Citrix examen 1Y0-A09 1Y0-A09
Vous avez aussi la possibilité à réussir le test Citrix 1Y0-A09. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.
没有评论:
发表评论