2014年3月23日星期日

NS0-111 dernières questions d'examen certification Network Appliance et réponses publiés

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Network Appliance NS0-111.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Network Appliance NS0-111, et aussi une meilleure assurance du succès du test NS0-111. Vous choisissez Pass4Test, vous choisissez le succès.

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Network Appliance NS0-111 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Network Appliance NS0-111. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Code d'Examen: NS0-111
Nom d'Examen: Network Appliance (Network Appliance Storage Associate Exam)
Questions et réponses: 83 Q&As

Pass4Test peut offrir nombreux de documentations aux candidats de test Network Appliance NS0-111, et aider les candidats à réussir le test. Les marétiaux visés au test Network Appliance NS0-111 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Network Appliance NS0-111 100%.

NS0-111 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-111.html

NO.1 Please click the exhibit button.
Which of the commands from the special boot menu will zero disks and install a new file system?
A. (1) Normal boot.
B. (2) Boot without /etc/rc.
C. (3) Change password.
D. (4) Initialize all disks.
E. (5) Maintenance mode boot.
Answer: D

Network Appliance examen   NS0-111   NS0-111   NS0-111   NS0-111

NO.2 Which one of the following is a valid VLAN interface?
A. E3-9
B. E0
C. E3a
D. All of the above
Answer: A

Network Appliance   NS0-111   certification NS0-111   NS0-111

NO.3 What are the syntax differences between the aggr copy command options and the vol copy command
options?
A. Aggr copy commands are case-sensitive, but vol copy commands are not case sensitive.
B. Aggr copy options do not work at the command line.
C. Aggr copy options must be listed in alphabetical order.
D. None; the syntax for both options are the same.
Answer: D

Network Appliance examen   certification NS0-111   NS0-111   NS0-111   NS0-111

NO.4 Which two of the following statements about qtrees and volumes are true? (Choose 2)
A. A volume can contain qtrees, but qtrees cannot contain qtrees.
B. A quota can be set for a qtree, but not for an exported file system.
C. A qtree can contain a volume, but a volume cannot contain a qtree.
D. The default security style for a qtree is the security style of the volume root directory.
Answer: AD

Network Appliance examen   certification NS0-111   NS0-111   certification NS0-111

NO.5 You are performing a Data ONTAP upgrade and have loaded the system files onto the storage
appliance, and have
successfully issued the download command.
What is the next command you would enter to complete the upgrade procedure?
A. version
B. sysconfig -v
C. software
D. reboot
Answer: D

Network Appliance   certification NS0-111   certification NS0-111

NO.6 Which one of the following commands is used to modify network interfaces on the storage appliance?
A. ipconfig
B. ifconfig
C. interface
D. ipset
Answer: B

Network Appliance examen   NS0-111   certification NS0-111   NS0-111 examen   certification NS0-111

NO.7 Which command would you use to display complete hardware information for a storage appliance?
A. vol status -v
B. sysconfig -v
C. sysstat
D. disk health -v
Answer: B

Network Appliance   NS0-111   NS0-111   NS0-111

NO.8 Which one of the following console commands indicates that all expansion cards are installed in the
appropriate slots on the system board?
A. config -v
B. vol status -r
C. sysconfig -c
D. sysconfig -t
E. sysconfig -m
Answer: C

certification Network Appliance   NS0-111 examen   NS0-111   NS0-111   NS0-111 examen

NO.9 Choose the best way to minimize backup time.
A. Tape backup over the WAN connection
B. Utilizing a larger tape capacity
C. Organizing data in volumes and qtrees
D. Using multiple local tape drives
Answer: D

certification Network Appliance   certification NS0-111   NS0-111 examen   NS0-111 examen   certification NS0-111   NS0-111

NO.10 What two conditions should be verified prior to performing remote backups? (Choose 2)
A. The trust relationships between the source and the destination
B. That clustered failover is disabled
C. That rsh is enabled for remote access
D. That remote backup is enabled
Answer: AC

Network Appliance   certification NS0-111   certification NS0-111   certification NS0-111

NO.11 Which one of the following statements best describes the primary value of NVRAM?
A. Data integrity and improved response time for write operations
B. RAID protection
C. Data integrity and simplified backups
D. Separate processing of the network protocol stack
E. Separate processes for the disk subsystem
Answer: A

certification Network Appliance   NS0-111 examen   certification NS0-111   NS0-111

NO.12 LUNs can be created using FilerView.
A. True
B. False
Answer: A

certification Network Appliance   NS0-111   certification NS0-111   NS0-111 examen   NS0-111

NO.13 Which line describes a 50M tree quota for a qtree named "mydata" on volume "vol1"? Target Type
Disk Files Thold Sdisk Sfiles
A. /vol/vol1/mydata tree 50M -
B. /vol/vol1 steve@tree 50M -
C. steve tree@/vol/vol1 50M -
D. /vol/vol1 qtree/steve 50M -
Answer: A

Network Appliance   NS0-111   NS0-111

NO.14 Which three actions can be performed with the restore command? (Choose 3)
A. View a list of files on tape.
B. Restore individual files and directories.
C. Restart a failed restore process.
D. Enter a number to specify how many filemarks should be skipped.
Answer: ABC

Network Appliance examen   certification NS0-111   NS0-111   certification NS0-111   NS0-111

NO.15 To recover a file from a snapshot using a Windows client, what directory will a user look for?
A. snapshot
B. .snapshot
C. snap
D. ~snapshot
Answer: D

Network Appliance   NS0-111 examen   NS0-111   NS0-111

NO.16 Which volume option will disable automatic snapshot creation?
A. Setting the nosnap volume option to on
B. Turning off access to the .snapshot directory
C. Setting the nosnapdir option to on
D. Setting snap reserve to 0%
Answer: A

Network Appliance   NS0-111 examen   certification NS0-111

NO.17 What is NDMP?
A. It is a standard protocol for controlling data transfers between primary and secondary storage devices
B. It is a proprietary protocol used for controlling data transfers between the storage appliance head and
disk drives
C. It is a networking trace analysis tool
D. It is a network management tool for storage appliances
Answer: A

Network Appliance examen   NS0-111 examen   NS0-111

NO.18 Which one of the following files will allow you to change the search order for hostname resolution?
A. /etc/hosts
B. /etc/resolv.conf
C. /etc/searchorder.conf
D. /etc/nsswitch.conf
Answer: D

Network Appliance   certification NS0-111   NS0-111 examen   NS0-111 examen   NS0-111

NO.19 If there are problems with user quotas being misapplied, the following two files should be checked:
A. /etc/quotas and /etc/rc
B. /etc/quotas and /etc/usermap.cfg
C. /etc/rc and /etc/usermap.cfg
D. /etc/quotas and /etc/quotarules
Answer: B

Network Appliance   certification NS0-111   NS0-111

NO.20 To recover a file from a snapshot using a UNIX client, what directory will a user look for?
A. snapshot
B. .snapshot
C. snap
D. ~snapshot
Answer: B

certification Network Appliance   certification NS0-111   certification NS0-111

NS0-111 est un test de Network Appliance Certification, donc réussir NS0-111 est le premier pas à mettre le pied sur la Certifiction Network Appliance. Ça peut expliquer certiainement pourquoi le test Network Appliance NS0-111 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test NS0-111. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

没有评论:

发表评论