Le test simulation offert par Pass4Test est bien proche du test réel. Vous pouvez apprendre tous essences d'un test réel à courte terme avec l'aide de Pass4Test. Pass4Test peut vous assurer le succès 100% de test Hitachi HH0-260.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Hitachi HH0-260.
Code d'Examen: HH0-260
Nom d'Examen: Hitachi (Hitachi Data Systems Certified Implementer File Services)
Questions et réponses: 120 Q&As
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Hitachi HH0-260 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
Si vous vous inscriez le test Hitachi HH0-260, vous devez choisir une bonne Q&A. Le test Hitachi HH0-260 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Si vous voulez ne se soucier plus à passer le test Hitachi HH0-260, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Hitachi HH0-260. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Hitachi HH0-260 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Vous allez choisir Pass4Test après essayer une partie de Q&A Hitachi HH0-260 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Hitachi HH0-260.
HH0-260 Démo gratuit à télécharger: http://www.pass4test.fr/HH0-260.html
NO.1 You are establishing a replication link between two HCP platforms. You set the performance
level as
part of the configuration options. What does this setting indicate?
A. the server priority rate for nodes associated with that replication link
B. the amount of bandwidth made available for replication on the link
C. the number of concurrent replication operations that can occur on each node
D. the data transfer rate associated with each tenant namespace
Answer: C
Hitachi HH0-260 HH0-260 HH0-260 certification HH0-260
NO.2 A storage administrator on a customer site is performing a diagnosis of the HCP system by
reviewing the system event logs.
Which two are recorded in the system events log? (Choose two.)
A. logical volume failures
B. namespace list
C. users deleted
D. roles assigned
Answer: A,C
Hitachi HH0-260 HH0-260
NO.3 Which two statements are true about the HCP back-end network? (Choose two.)
A. All nodes in a HCP system must be on the same system-specific private back-end IP subnet.
B. All nodes in a HCP system must be split across a dual-redundant private back-end IP subnet.
C. The fourth octet of the back-end IP addresses should not be changed after it has been
configured.
D. The fourth octet of the back-end IP addresses must match the fourth octets used in the front-end
IP
addresses.
Answer: A,C
Hitachi examen HH0-260 certification HH0-260 HH0-260 examen HH0-260
NO.4 Which three replication types are supported by HCP? (Choose three.)
A. chain
B. many-to-one
C. one-to-many
D. bidirectional
E. link level
Answer: A,B,D
Hitachi certification HH0-260 HH0-260 examen HH0-260 examen HH0-260 HH0-260
NO.5 A customer has an existing HCP 500 consisting of four storages nodes. They have just
purchased an additional HCP 500 and you are informed that you will be performing the replication
setup.
What is the requirement prior to setting up replication?
A. trusted replication server certificates
B. replication link
C. outbound link name
D. inbound link name
Answer: A
certification Hitachi HH0-260 certification HH0-260 HH0-260 examen HH0-260 examen
NO.6 You have performed an upgrade on a customer's HCP. You complete the upgrade and verify
that all the nodes are online and then give the system back to the customer. A few minutes later,
the customer
complains that they can read existing content but they cannot create new content on the HCP.
Which step was missed?
A. The install user password was changed.
B. The upgrade was not committed.
C. The rollback was not performed.
D. The system management console is disabled.
Answer: B
certification Hitachi certification HH0-260 HH0-260 HH0-260
NO.7 Which three statements are true about encryption on a HCP? (Choose three.)
A. Once enabled, encryption cannot be disabled.
B. The encryption key is accessible through the system management console.
C. Encryption can only be enabled at the time of installation.
D. The encryption key must be written down and given to the customer.
E. The encryption key is displayed several times during the installation process.
Answer: A,C,D
Hitachi examen HH0-260 examen HH0-260 examen
NO.8 What is the required zone configuration of a SAN fabric to support a HCP 500?
A. one global zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports and
the
storage ports
B. one zone per HCP node containing two members: World Wide Port Names (WWPN) of the HBA
port
and the storage port
C. two mirrored zones; one containing the even numbered World Wide Port Names (WWPN) of the
HBA
port and the storage port; the other containing odd numbered ports
D. two zones: one zone containing all HCP nodes World Wide Port Names (WWPN) of the HBA ports
and
the second zone containing all the storage ports
Answer: B
Hitachi examen certification HH0-260 HH0-260 HH0-260
NO.9 How should the RAID group(s) and logical volume(s) be configured on a HCP 300 node?
A. three RAID groups each with three logical volumes
B. three RAID groups each with a single logical volume
C. a single RAID group with a single logical volume
D. a single RAID group with three logical volumes
Answer: D
certification Hitachi HH0-260 examen HH0-260 examen
NO.10 Your customer wants to use IP addresses which conflict with the default HCP network
settings. As a result you need to change the back-end IP addresses for each HCP node.
Which HCP network settings should you change?
A. the back-end gateway router IP address
B. the back-end subnet mask
C. the first three octets of the back-end IP addresses
D. the fourth octet of the back-end IP addresses
Answer: C
Hitachi HH0-260 HH0-260 examen certification HH0-260
NO.11 You are configuring a HCP 500 solution with AMS 2100 storage. You choose to configure the
storage devices first in the list of tasks associated with this process.
What is the reason for sequencing the tasks in this way?
A. The HCP software must first be installed on the AMS 2100 for access.
B. Formatting the storage containers will take a considerable amount of time.
C. You must have the data LUNs established before you can install the core OS.
D. The HCP command LUN must be established on the AMS 2100.
Answer: B
certification Hitachi HH0-260 HH0-260 examen
NO.12 Which OS LUN size do all HCP 300 configurations use?
A. 20 GB
B. 30 GB
C. 50 GB
D. 400 GB
Answer: B
Hitachi HH0-260 certification HH0-260
NO.13 In a SAIN based HCP solution, which RAID protection scheme is considered standard use with
an
AMS 2000 system?
A. RAID 5 (6+1)
B. RAID 6 (5+2)
C. RAID 6 (6+2)
D. RAID 5 (7+1)
Answer: B
certification Hitachi certification HH0-260 HH0-260 HH0-260 examen
NO.14 Which two factors should you consider prior to performing an upgrade? (Choose two.)
A. the physical location of the highest numbered search node
B. the physical location of the highest numbered storage node
C. the install user password
D. the service user password
Answer: B,C
Hitachi examen certification HH0-260 HH0-260 HH0-260
NO.15 Which three tenant management console permissions does the security role have on a HCP?
(Choose three.)
A. View namespace access protocol configurations.
B. View tenant log messages about security events.
C. View tenant overview.
D. Monitor replication.
E. Modify tenant management console security settings (HCP tenants only).
Answer: B,C,E
Hitachi HH0-260 examen HH0-260 certification HH0-260 HH0-260 certification HH0-260
NO.16 You are adding two more volumes into each node of a HCP 500 DL. The storage administrator
informs you that all SAN volumes have been created, zoned and presented to the HCP.
Which LUN number presented to the HCP will cause a problem.?
A. 5
B. 128
C. 130
D. 131
Answer: B
Hitachi HH0-260 certification HH0-260 HH0-260 HH0-260
NO.17 A customer wants to ingest around 1 million files residing in several Windows 2003 and
RedHat Linux servers into three newly created HCP tenants and namespaces.
Which two procedures do you recommend? (Choose two.)
A. Use copy, move and create directory functions available from HCP client tools for Linux.
B. Use copy, move and create directory functions available from Linux server.
C. Use copy, move and create directory functions available from HCP client tools for Windows.
D. Use copy, move and create directory functions available from Windows server.
Answer: A,C
Hitachi HH0-260 HH0-260 HH0-260 examen HH0-260 certification HH0-260
NO.18 Which node architecture is used by the HCP 500?
A. SAIN
B. PAIN
C. RAIN
D. NAIN
Answer: A
Hitachi HH0-260 HH0-260 examen
NO.19 A customer expects to store 4 billion objects with an initial HCP configuration. Search is not
required at this time.
Which configuration will meet the requirements for this customer?
A. HCP 300 with ten storage nodes
B. HCP 500 with two storage nodes
C. HCP 300 with four storage nodes
D. HCP 500 with eight storage nodes
Answer: A
Hitachi HH0-260 HH0-260
NO.20 A customer will be removing old Windows file servers and moving existing data to the default
namespace on their new HCP 500.
Which protocol is recommended to accomplish the move?
A. CIFS
B. HTTP
C. REST
D. NFS
Answer: A
Hitachi HH0-260 HH0-260 certification HH0-260 HH0-260
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
没有评论:
发表评论